Model: NL-HSQH-2
The problem
Switching endurance is a hard gate for shower head export and water efficiency certification: water no warmer than 30C, dynamic pressure 0.25MPa, 1500 cycles per hour, 10000 switching operations with no abnormal leakage and no loss of function. Hand cycling never reaches that frequency, cannot keep the line pressurised throughout and leaves no count record, and a batch of samples wears out the operator first.
Capability
The machine tests the endurance of shower head diverter functions against a duty of water not warmer than 30C, pressure 0.25 plus or minus 0.02MPa, 1500 cycles per hour and 10000 switching operations without abnormal leakage or loss of function. Two stations run together; a stepper motor drives the switching handle through each position like a human hand, giving a stable reproducible rhythm. A multi stage centrifugal pump with a variable frequency drive holds dynamic pressure from 0.1 to 0.5MPa adjustable at up to 4 cubic metres per hour of ambient water. Dwell time is settable from 1 to 9999 seconds and the cycle count from 1 to 999999, stopping automatically at the set figure. The PLC with a 7 inch human machine interface shows count, pressure and status live. The switching runs with the water line pressurised throughout, each spray position is observed during the test, and abnormal leakage raises a prompt and is recorded. The trough and tank are SUS304 stainless steel with corrosion resistant plumbing; maximum power is 2.5kW. An optional swing drive covers rocking endurance of rotating shower outlets, applying mechanical motion and water pressure at the same time.


Applicable standards
GB/T 23447-2009 Sanitary ware, showers for domestic use (current); EN 1112 European showers; ASME A112.18.1 / CSA B125.1 North American plumbing fixture performance, current edition; GB 18145-2014 Ceramic disc mixing valves, rocking endurance clauses (current); cycle count, pressure and rhythm follow the customer standard or export certification requirement.
Key specifications
- Stations: 2 running together
- Duty: 0.25 plus or minus 0.02MPa, 1500 cycles per hour, 10000 operations
- Judgement: no abnormal leakage, no loss of function
- Working pressure: dynamic 0.1 to 0.5MPa adjustable
- Water: ambient temperature, not warmer than 30C
- Dwell time: 1 to 9999s settable
- Cycle count: 1 to 999999 settable
- Drive: stepper motor on the switching handle
- Water supply: multi stage pump with variable frequency, up to 4 m3/h
- Control: PLC with 7 inch touch screen
- Build: SUS304 trough and tank
- Dimensions: 1650 by 1000 by 1700mm
- Power: three phase AC380V, 2.5kW maximum
Applications
Factory endurance sampling at shower head and sanitary hardware plants; pre testing before water efficiency labelling and export certification to EN and ASME/CSA requirements; shower endurance testing in third party inspection bodies; rocking endurance of shower hoses and rotating outlets
About the manufacturer
Guangdong Endurance Electronic Equipment Co., Ltd provides non-standard customization, drawing confirmation, factory acceptance, on-site installation and commissioning, operation training and long-term technical service; 12-month warranty and long-term spare parts supply. Tel: 0760-88500902 / 13416787649. Web: en.zsnaili.com.