characteristic
1. Reliable additional safety device;
2. Easy operation, bearing combination, sliding balance and independent formwork lifting device
3. Save space, cover an area of 1.8 square meters, and can store dozens of small and medium-sized molds;
4. The utility model has simple structure and is assembled by a variety of combined parts, which is convenient for disassembly, transportation and assembly;
5. Drawer type die frame, each grid and each layer bearing 800-1000kg;
6. Save space, each grid can put multiple sets of molds, which is convenient for mold maintenance, management and search;
7. After the formwork is drawn and loaded, it can be easily pumped, and the upper and lower spacing can be adjusted at will. In cooperation with the available pulley and manual hoist, the access work can be completed easily and quickly;
8. The mold base adopts a detachable structure, all accessories can be combined arbitrarily, with up-down spacing and easy disassembly;
9. It can be adjusted at will. It can be used alone or connected at will, which is convenient for installation;
10. The bearing weight of each layer can reach 800kgs / 1800kgs; The structure is scientific and reasonable. It is firm and reliable after assembly and molding as required
Classification
1. The mold frame is divided into: A. standard type; b. Model with sky; c. Heavy duty; d. Fully open type; e. Sliding plate type; f. Extension and retraction type 2. It can be customized according to customer's requirements
Product characteristics of standard drawer die frame
Three grid four layer standard drawer type die frame; Specifications; Height H2000 * depth d615 * length l310mm, length 888 per grid
1. Each drawer board can bear 800-1000kg
2. The load of crown block (traveling crane) is 800-1000kg
3. Drawer board can be pulled out by 65%
4. Reliable additional safety device
5. Easy operation, bearing combination, sliding balance and independent formwork lifting device
6. It saves space, covers an area of 1.8 square meters, and can store dozens of small and medium-sized molds
7. The utility model has simple structure and is assembled by a variety of combined parts, which is convenient for disassembly, transportation and assembly
Technical parameters of standard drawer die frame
1. The column adopts 10# channel steel, and the slash of the column is 25 * 25 square
2. The drawer board support adopts 50 * 50 angle iron, and the drawer panel adopts 2mm steel plate
3. The chute is formed by bending 4mm steel plate
4. The bearing is 6403#
5. Painting
6. The color is customized by the customer
Medium full open die frame
1. Each plate bears 1000-3000kg
2. Drawer out 95%
3. Three grid and four layer specifications; H2400*W1100*L3400MM
Heavy duty drawer type die holder
Each grid and each layer bear 2-3T specification: height h2100 * w1205 * l1100, length infinity
1. The specification of heavy-duty drawer die frame can be customized according to customer requirements.
2. The product features of heavy drawer die frame are the same as above
3. Technical parameters: the column adopts 10# channel steel, and the slash of the column is 25 * 25 square
4. The drawer board support adopts 40 * 80 flat through, and the drawer panel adopts 2.5mm steel plate
5. The chute is formed by bending 6mm steel plate
6. The bearing is 6404#
7. The color is customized by the customer
广告
