丝印PE油墨

丝印PE油墨销售厂家！

1、适用范围：主要用于各种PP料、PE、PET、PPB等制品的丝印移印。
2、产品特性：亮光、遮盖力高、附着力佳、耐冲压、耐天那水、耐丁酮、耐汽油。
3、稀释剂：用我司专用稀释剂或783开油，用718洗网水清洗网版。 


4、固化剂：不需添加。 


5、油墨调配方法：开罐先搅拌均匀，取所需量油墨稀释到合适印刷粘度使用。 


6、干燥时间：逢然干燥：室温表干5-10分钟，实干24小时；烘烤干燥，80-100度烤20-30分钟，油墨层方可达{zj0}性能。 


【性能检测】 


1、3M胶带划百格测试：{bfb}无脱落 


2、耐冲压测试：1mm厚铝板180°折弯无变化。 


3、耐丁酮测试：用脱脂棉沾丁酮以500G力水平来回100次无脱色。 


4、耐天那水测试：用脱脂棉沾天那水以500G力水平来回100次无脱色。 


【注意事项】 


1、先小量试印确认符合要求后再批量生产。 


2、做好承印物的表面qc油脂及杂质工作，以促进附着效果。 


3、附着力、硬度、耐酸性、耐酒精性、耐化学品性、抗划伤性、耐磨性等性能的检测，需要wq固化后方可检测。 


4、未经允许情况下，不得将本系列油墨与其它类型油墨混用及配色。 


5、油墨，稀释剂使用及储存时严禁烟火。 


6、使用时注意施工场所的通风状况良好，尽量避免皮肤直接接触。 


7、本品不慎溅入口、鼻、眼、耳内，应用大量水清洗或直接求助医生。 

 Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.