主要用途：
Usage：
用于软管包装行业对全塑软管进行挤出成形
It’s used for extruding soft tubes.
Features：
五层管组成由外层、内层、两个粘合层，另有阻隔层。其有极好的气体阻隔性能，能有效防止氧气和异味气体的渗入，同时防止内物香味及有效成份的渗出。
5-layers tubes is made up of outer layer, inner layer, 2 sticking layers and a shielding layer; it has perfect insulation to air, and can prevent oxygen and different smell penetrating into the tube, as well as preventing in-tube content and adore leakage.
2．即使模头外形结构复杂、体形大，但操作无异于单层机，挤出时层与层之间分部均匀并塑化性好。
2．Though it has large size and complex structure, the operation is same as single layer extruder; each layer is placed evening with good plasticity.
3．每层由各自螺杆独立完成
3. Each layer is made by separate screw.
4．操作电路系统、温控系统由台湾原厂的专业的工程师设计，加热丝及螺杆电机由台湾原装进口，保证了机械的长时间地工作。
4．Electrical system and temperature controlling system is designed by professional Taiwanese engineer; Heating wires and screw motor is imported from Taiwan, to ensure long hours working of the machine.
技术参数：
Technical parameters：
产品直径：16~60
Tube diameter：16~60
生产速度：10米/分钟
Capacity：10m/min
配套电机：外/内层电机为5.5KW; 粘合层/阻隔层电机3.7KW; 切台电机：0.75KW
真空泵：1.5KW; 伺服电机：0.85KW 牵引台电机：1.5KW
Motors：outer/inner layer motor 5.5KW; sticking layer/shielding layer motor 3.7KW; cutting table motor：0.75KW; vacuum pump：1.5KW; servo motor：0.85KW drawing table motor：1.5KW
加热总功率： 50KW
Heating power： 50KW
工作水压：1.5～2.5兆帕
Working water pressure：1.5～2.5MPa
五层软管挤出机 上海博睦实业有限公司 021-56556997
广告
