耐高温(阻燃)电力电缆-中盛电力电缆销往国内外耐高温(阻燃)电力电缆
High Temperature Resistant (Flame Retardant)
Power Cable
本产品适用于额定电压0.6/1kV及以下的高温范围和恶劣
环境内，作电气设备电能传输线。
It is used as power transmission cable for electric
equipments of rated voltage 0.6/1kV or lower in bad
environment or that with high temperature.
一、生产执行标准 采用企业标准Executive standard: enterprise standard
二、使用特性 Performance in Usage
1、额定电压UO/U: 0.6/1kV。
2、电缆允许{zg}工作温度: 氟塑料绝缘及护套为200℃；
氟塑料绝缘耐热105聚氯乙烯护套为105℃；氟塑料绝缘硅橡
胶护套为180℃。
3、短路时(最长持续间不超过5S)电缆导体的{zg}温度不
超过250℃。
4、电缆敷设温度应不低于-15℃。
5、电缆的弯曲半径如下：单芯电缆：其弯曲半径不小于
电缆外径的20D。
三芯电缆:其弯曲半径不小于电缆外径的15D。
6、氟塑料绝缘及护套型电力电缆具有优异的耐化学腐蚀
性、耐高温及阻燃性。
1: Rated voltage UO/U: 0.6/1kV
2: Max.working temperature allowed by cable is
200℃ for cable with fluoroplastic insulation and sheath,
105℃ for cable with fluoroplastic insulation，105℃ heat
resistanc and PVC sheath, and 180℃ for cable with fl uoroplastic
insulation and silicon rubber sheath.
3: Max temperature of cable conductor is no more
than 250℃ during short circuit (The longest lasting time is
no more than 5s).
4: Temperature for installation is no less than -15℃.
5: Bending radius of cable as follows:
It is no less than 20 times that of cable outer diameter
for cable with single core
It is no less than 15 times that of cable outer diameter
for cable with 3 cores
6: Power cable with fluoroplastic insulation and
sheath has good features of chemical corrosion resistance,
high temperature resistance and fl ame retardance.
三、电缆的型号名称 Type and Description
1、电缆的型号名称如表1 Type and Description in Table 1
Table 1
型 号
Type
名 称
Description
FF 聚全氟乙丙烯绝缘护套耐高温电力电缆
High temperature resistant power cable with F46 insulation and sheath
广告
